Reset drum (photoconductor) Dell

Resetting the Drum Page Counter

• 1

  

  Shut off the printer.

• 2

  

  Hold down the "Cancel" button while opening the front door. Then turn on the printer

• 3

  

  Keep the Continue button held down until only the "Error LED" is on then release the button. Close the door.

• 4

  

  The Continue button, Ready/Data, Toner Low, and Load Paper LEDs should all be lit up.

• 5

  

  Press "Cancel" a few times to cycle through the LEDs until just the "Toner Low LED" is lit.

• 6

  Press and hold the "Continue" button until the LEDs cycle through and release only when the LED stops at Toner Low.

• 7

  Turn the printer off and back on.